ZT5211 VXI
Analogic DBS901 Replacement Solution
The ZTEC ZT5211 is a modern
waveform generator that provides extensive functionality, in most cases beyond that of the DBS901.
See below for a list of the differences between the ZT5211 and the DBS901. Because the instrument functionality, command set, and I/O
ranges are different, there is some effort involved with the integration of the ZT5211 in place of the DBS901.
ZTEC's application engineering team has significant experience with the functional differences between the DBS901
and the ZT5211, as well as the application details of using waveform generators in ATE test programs. This experience
is invaluable when assisting a test system integrator in successfully modifying an existing ATE system or TPS.
Please, visit the ZTEC ZT5210 Series
page for more information on the ZT5211.
| Specification | Analogic DBS901† | ZTEC ZT5211 VXI |
|---|---|---|
| Output Channels | 1 or 2 (Two DBS901 units in a DBS9900 carrier module) | 2 (ZT5211 VXI) or 4 (ZT5212 VXI) |
| Analog Bandwidth | 10 kHz to 50 MHz | DC to 10 MHz (±0.1dB passband flatness)
DC to 25 MHz (-1dB bandwidth) DC to 50 MHz (-3dB bandwidth)) |
| Digital-to-Analog Converter Resolution | 14 Bits | 14 Bits |
| Range Adjust | Terminated: ±0.5V,±1.0V, ±2V, ±5.0V
Open Circuit: 2X terminated range |
7.5 mVpp to 14 Vpp into 50Ω
15 mVpp to 28 Vpp into High Impedance Range independently adjustable for each cannel |
| Output Impedence | Programable: 50Ω or 75Ω | 50Ω |
| Lowpass Filters | None, 5 MHz or 20 Mhz:
3rd order Bessel |
None, 100k Hz, 1 MHz, 10 MHz, or 50 MHz:
5-pole Bessel |
| DC Offset Adjust | Terminated: ±2.5V Greater than full scale amplitude range ±5V max.
Open Circuit: 2X terminated range |
0 to ±7V into 50Ω
0 to ±14V into High Impedance |
| DC Offset Resolution | 12 bits | 0.5 mV |
| Output Voltage Limit | Terminated: ±5.0V
Open Circuit: 2X terminated range |
|Vamp+Voffset| ≤ 7V into 50Ω
|Vamp+Voffset| ≤ 14V into high impedance |
| Range Accuracy | ±0.5V range: >1%
All other ranges: ±2% |
< ±(0.5% of Range + 10mVpp) at 25 °C ambient |
| Slew Rate | Not Slew Rate Limited
(100 MS/s Clock, 50 MHz Output Signal) |
> 2000 V/μs into 50Ω (50 MHz Filter) |
| Waveform Data | Memory Size: 1 or 8‡ MS
Segment Length: 10 samples to 64 ks Number of Segments: 1 to 43,687 Looping: 1 to 64k repetitions or continuous |
Memory Size: 32 MS
Segment Length: 4 Samples to 32 MSamples/channel Number of Sgements: 2 to 4096 Looping: 1 to 65535 repetitions or continuous |
NOTES:
† - All DBS901 specifications are for modules installed in DBS 9900 carrier module unless otherwise stated.
‡ - Via DBS901LM long memory option.
Get your questions answered thoroughly and quickly by submitting a ticket to the ZTEC Customer Support Center.
